How Do You Transfer A Design From A Computer To A Janome 11,000 By The Usb Cable?
You'll learn how to transfer several designs to the MC11000 via Flash Media.
What you'll larn
Y'all'll learn how to transfer several designs to the MC11000 via Wink Media.
If you cannot or cull not to connect your MC11000 to your estimator with a USB cable, yous can transfer several designs that are on whatever storage media in your computer to a folder on a compact flash card (ATA card) or USB Memory Key in your reckoner. The device you write to becomes a transportation device to carry your designs to the MC11000.
The plan for this lesson is to ship all the designs from the Flowers folder and three designs from the Border and Corner folder to the MC11000 using a compact flash card (ATA card) or USB Retentivity Fundamental.
The Flowers and Border and Corner folders were placed on your C: drive when Customizer 11000 was installed on your estimator.
i. Click FlashMemory, Write Designs, Read and Erase...
OR
Click the down arrow to the right of the Send a Blueprint icon. Click Designs.
Either style volition bring up the Write Designs, Read and Erase (Off-line) dialog box.
The Write Designs, Read and Erase dialog box is divided into 3 sections.
1. The left side of the box shows folders and designs on your PC.
2. The right side of the box shows folders and designs on a compact flash (ATA carte du jour) or a USB Retentiveness Key in your computer.
3. The center part of the box has three buttons for the action you desire to do to communicate between the PC and the embroidery machine.
To write designs to wink memory
Step 1. Cull the flash memory device.
In the Write Designs, Read and Erase (Off-line) dialog box, the lowest-lettered computer drive that has wink memory is the default area for sending designs. In the example below, compact flash (ATA card) is the E: drive, and the USB Memory Central is the G: drive. The dialog box defaults to the compact wink (ATA card) because it is a lower letter.
Step two. Bespeak to the folder where you want the designs to be sent.
To ship the designs to the Embf folder on the compact flash (ATA carte), double click on the folder. This will open the folder and information technology will as well activate the Write button in the eye of the screen.
Step 3. Tell Customizer 11000 where the designs are stored.
We'll first get the designs from the Flowers folder. To select them, we must change the location in the PC: box on the left side of the dialog box.
Click the down arrow in the PC box to get a map of your computer. Click drive C:, then double click succeeding folders.
This is the path to get to the designs:
C: on your estimator's C: drive (or hard drive), is the
i.Program Files binder Open up this, and find a folder called:
two.JanomeOpen this, and observe a folder called:
three.Customizer 11000 Open this, and find a folder called:
4.Sample Designs Open this, and find a binder called:
5.Designs Open this, and find a binder called:
6.Flowers These are the designs nosotros desire.
One time the Flowers binder is showing on the PC side of the screen, double click information technology to see the designs in the folder.
There are thirteen designs in the binder. To select all of them, we caneither:
click a bank check mark in the lower right corner of each design box,
OR
right click on whatever design to bring up the submenu, and so click Check all to select all of them.
If you apply the submenu, you will get a confirmation box telling y'all that you are choosing all the designs in the binder. If this is acceptable, click OK to keep with the selection.
In one case the designs are all selected, we need to turn our attention to the correct side of the dialog box to tell Customizer 11000 where to write the designs.
Pace four. Click the Write push button.
Click the Write button to transfer all of the designs in the Flowers folder to the Embf folder on the compact flash (ATA card).
The Write button will deactivate once the designs are transferred.
We at present want to send three designs from the Children'south Designs folder.
To transport Three Designs from the Children's Designs Folder:
Step 1. Select the flash device.
We do not have to echo step 1 because compact flash (ATA carte) is currently selected.
Pace two. Indicate to the folder where yous want the designs sent.
Since we already take the Embf binder in the meaty flash (ATA card) open, we don't have to take further action.
Step 3. Select the designs you want to transport.
To point to the Border and Corner folder, we need to get support the pathway. Rather than getting a map of the C: drive over again, which nosotros could get past clicking the down pointer in the PC box, we tin click the Up icon to point dorsum to the folders in the 1.Designs folder.
Double-click on Border and Corner to open it.
Click to select the get-go three designs, Border 1, Border ii, and Border 3. Each click will ready a check-mark on the design.
The Write push button will activate once again.
Pace 4. Click the Write push.
Click the Write button to transfer the designs.
A notation about flash memory:
All parts of this lesson apply to USB Memory Central too as a compact flash card (ATA card).
How Do You Transfer A Design From A Computer To A Janome 11,000 By The Usb Cable?,
Source: https://www.janome.com/learn/software-lessons/transferring-designs/transferring-several-designs-to-the-mc11000-via-flash-media/
Posted by: gattiadmiand1953.blogspot.com
0 Response to "How Do You Transfer A Design From A Computer To A Janome 11,000 By The Usb Cable?"
Post a Comment